identifier	taxonID	type	CVterm	format	language	title	description	additionalInformationURL	UsageTerms	rights	Owner	contributor	creator	bibliographicCitation
03E86429A319FFDCE2ADC78EF7E61A55.text	03E86429A319FFDCE2ADC78EF7E61A55.taxon	http://purl.org/dc/dcmitype/Text	http://rs.tdwg.org/ontology/voc/SPMInfoItems#GeneralDescription	text/html	en	Midoria Kato	<div><p>Midoria Kato</p><p>Midoria Kato, 1931: 439 . Type species: Midoria capitata Kato, 1931 .</p><p>Diagnosis. Midoria is similar to Thlasia but smaller, with the head less strongly produced and the aedeagal shaft compressed, with one or two pairs of moderately long processes subapically on the posteroventral surface. For a detailed generic description see Li &amp; Li (2010). As the type of Midoria capitata is unavailable for study, we here consider capitata as a species inquirenda.</p><p>Distribution. Oriental Region (China: Taiwan, Guizhou, Yunnan).</p><p>Key to species (3) of Midoria (except Midoria capitata Kato)</p><p>1. Aedeagal shaft with two pairs of processes on ventroapical region............................................... 2</p><p>- Aedeagal shaft with two processes on ventroapical region...................................................... 3</p><p>2. Apex of aedeagal shaft forked......................................................... M. huapingensis Li &amp; Li</p><p>- Apex of aedeagal shaft not forked........................................................... M. hei Cai &amp; Jiang</p><p>3. Ventroapical processes of aedeagal shaft forklike......................................... M. annulata Cai &amp; Jiang</p><p>- Ventroapical processes of aedeagal shaft not forklike......................................................... 4</p><p>4. Aedeagus shaft serrated on dorsal margin (Figs 1, 2)........................................ M. denticulata sp. nov.</p><p>- Aedeagal shaft not serrated on dorsal margin................................................................ 5</p><p>5. Ventroapical process of aedeagus with basolaterally directed process near base..................................... 6</p><p>- Ventroapical process of aedeagus without basolaterally directed process near base.................................. 7</p><p>6. Paramere long, with angulate preapical projection; pygofer side with posterior process hooked ventrad near apex (Figs 13, 14).................................................................................... M. hamulata sp. nov.</p><p>- Paramere long, without angulate preapical projection; pygofer with posterior process not hooked ventrad (Figs 21, 22).......................................................................................... M. hastifera sp. nov.</p><p>7. Aedeagal shaft with ventroapical processes (Figs 5, 6)....................................... M. deplanata sp. nov.</p><p>- Aedeagal shaft without ventroapical processes............................................................... 8</p><p>8. Ventroapical processes of aedeagal shaft ox-horn like (Figs 17, 18)................................ M. torsiva sp. nov.</p><p>- Ventroapical processes of aedeagal shaft not ox-horn like...................................................... 9</p><p>9. Aedeagus with processes flat, shaft without ridge on each side near apex......................................... 10</p><p>- Aedeagus with processes thick, shaft with ridge on each side near apex.......................................... 11</p><p>10. Processes of aedeagal shaft short, with fine apical spicule..................................... .. M. lamellata Li &amp; Li</p><p>- Processes of aedeagal shaft long, with broad apical spicule (Figs 9, 10).......................... M. zunyiensis sp. nov.</p><p>11. Ventroapical processes of aedeagus with small subapical projection....................... M. emmrichi (Zhang &amp; Yang)</p><p>- Ventroapical processes of aedeagus without small subapical projection........................................... 12</p><p>12. Processes of aedeagus elongate.................................................. M. longicornis (Zhang &amp; Yang)</p><p>- Processes of aedeagus moderately long..................................................... M. funebris (Jacobi)</p></div>	https://treatment.plazi.org/id/03E86429A319FFDCE2ADC78EF7E61A55	Public Domain	No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.		MagnoliaPress via Plazi	Li, Yu-Jian;Li, Zi-Zhong	Li, Yu-Jian, Li, Zi-Zhong (2011): Descriptions of six new species of Midoria (Hemiptera: Cicadellidae: Ledrinae) from China with a key to the species of the genus. Zootaxa 2897: 57-63, DOI: 10.5281/zenodo.207765
03E86429A318FFDCE2ADC1C6F62C1F46.text	03E86429A318FFDCE2ADC1C6F62C1F46.taxon	http://purl.org/dc/dcmitype/Text	http://rs.tdwg.org/ontology/voc/SPMInfoItems#GeneralDescription	text/html	en	Midoria denticulata	<div><p>Midoria denticulata sp. nov.</p><p>Figs 1–4, 25, 28</p><p>Description. Head, pronotum and scutellum dark brown, with any dark green luster. Median length of vertex about as long as half width between eyes, shorter than scutellum (Fig. 25). Face black (Fig. 28).</p><p>Male genitalia: Paramere long, anterior portion shorter than caudal portion, caudal portion somewhat robust, apex strongly recurved medioventrally, with some macrosetae near the recurved area (Figs 1, 2). Connective Tshaped with dorsomedial keel (Figs 1, 2). Aedeagus shaft compressed, with two flat pellucid ventral processes arising from basal area, dorsal margin serrate (Figs 1, 2). Pygofer side rounded, with long posterior process from ventral margin (Fig. 3).</p><p>Other characteristics are as shown in Figs 1–4, 25, 28.</p><p>Measurement. Length (including tegmen): 3, 6.6 mm.</p><p>Hosts. Unknown.</p><p>Type Material. Holotype 3, CHINA: Guizhou, Zunyi, Suiyang, Kuankuoshui, 2–5 June 2010, coll. Zhang Bin.</p><p>Remarks. This species is similar to Midoria funebris (Jacobi), but can be distinguished by the shape of the male pygofer side, the shape of the aedeagal shaft in side view and the shape of the aedeagal ventrosubapical processes (Figs 1, 2, 3).</p><p>Etymology. The species name refers to the serrate dorsal margin of the aedeagus.</p></div>	https://treatment.plazi.org/id/03E86429A318FFDCE2ADC1C6F62C1F46	Public Domain	No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.		MagnoliaPress via Plazi	Li, Yu-Jian;Li, Zi-Zhong	Li, Yu-Jian, Li, Zi-Zhong (2011): Descriptions of six new species of Midoria (Hemiptera: Cicadellidae: Ledrinae) from China with a key to the species of the genus. Zootaxa 2897: 57-63, DOI: 10.5281/zenodo.207765
03E86429A318FFDEE2ADC431F1FE19C8.text	03E86429A318FFDEE2ADC431F1FE19C8.taxon	http://purl.org/dc/dcmitype/Text	http://rs.tdwg.org/ontology/voc/SPMInfoItems#GeneralDescription	text/html	en	Midoria deplanata	<div><p>Midoria deplanata sp. nov.</p><p>Figs 5–8, 26, 29</p><p>Description. Head, pronotum and scutellum dark brown. Median length of vertex shorter than half width between eyes or scutellum (Fig. 26). Face black (Fig. 29).</p><p>Male genitalia: Paramere long, anterior portion slightly shorter and more slender than caudal portion, caudal portion obviously robust, apex strongly recurved medioventrally, with some macrosetae near the recurved area (Figs 5, 6). Connective T-shaped with high dorsomedial keel (Figs 5, 6). Aedeagus shaft compressed, with slender long process arising from each side of posterior margin basally pressed to sides of shaft (Figs 5, 6). Pygofer oblong, with long posterior process from ventral margin, base of process more straight (Fig. 7).</p><p>Other characteristics as shown in Figs 5–8, 26, 29.</p><p>Measurement. Length (including tegmen): 3, 7.1 mm.</p><p>Hosts. Unknown.</p><p>Type Material. Holotype 3, CHINA: Guizhou, Zunyi, Suiyang, Kuankuoshui, 2–5 June 2010, coll. Li Yujian (GUGC).</p><p>Remarks. This species is similar to Midoria lamellata Li &amp; Li, but can be distinguished by the shape of the male pygofer side, the shape of the aedeagal shaft in dorsal view and the shape of the aedeagal ventrosubapical processes (Figs 5, 6, 7).</p><p>Etymology. The species name refers to the flattened aedeagus.</p></div>	https://treatment.plazi.org/id/03E86429A318FFDEE2ADC431F1FE19C8	Public Domain	No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.		MagnoliaPress via Plazi	Li, Yu-Jian;Li, Zi-Zhong	Li, Yu-Jian, Li, Zi-Zhong (2011): Descriptions of six new species of Midoria (Hemiptera: Cicadellidae: Ledrinae) from China with a key to the species of the genus. Zootaxa 2897: 57-63, DOI: 10.5281/zenodo.207765
03E86429A31AFFDEE2ADC64BF7141FB3.text	03E86429A31AFFDEE2ADC64BF7141FB3.taxon	http://purl.org/dc/dcmitype/Text	http://rs.tdwg.org/ontology/voc/SPMInfoItems#GeneralDescription	text/html	en	Midoria hamulata	<div><p>Midoria hamulata sp. nov.</p><p>Figs 13–16, 31, 34</p><p>Description. Head, pronotum and scutellum brown, front of pronotum and area of crown adjacent to eyes yellow brown. Median length of vertex about as long as 4/5 of half width between eyes, shorter than scutellum (Fig. 31). Face black (Fig. 34).</p><p>Male genitalia: Paramere long, anterior portion about equal to caudal portion, caudal portion somewhat robust, apex strongly recurved medioventrally, with pyramidal process and some macrosetae preapically (Figs 13, 14). Connective T-shaped with dorsomedial keel (Figs 13, 14). Aedeagus shaft compressed, with two processes arising from each side of posterior margin basally, each process with spine projecting basolaterad (Figs 13, 14). Pygofer side ovoid, with long hooked posterior process from ventral margin (Fig. 15).</p><p>Other characteristics are as shown in Figs 13–16, 31, 34.</p><p>Measurement. Length (including tegmen): 3, 5.9–6.0 mm.</p><p>Hosts. Unknown.</p><p>Type material. Holotype 3, CHINA: Yunnan, Fugong, 18 May 2010, coll. Li Hu. Paratype: 13, CHINA: Yunnan, Fugong, 18 May 2010, coll. Li Hu (GUGC).</p><p>Remarks. This species is similar to Midoria funebris (Jacobi), but can be distinguished by the shape of the male pygofer side, the shape of the paramere and the shape of the aedeagal ventrosubapical processes (Figs 13, 14, 15).</p><p>Etymology. The species name is derived from the shape of the male pygofer processes (hamate, hamatus).</p></div>	https://treatment.plazi.org/id/03E86429A31AFFDEE2ADC64BF7141FB3	Public Domain	No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.		MagnoliaPress via Plazi	Li, Yu-Jian;Li, Zi-Zhong	Li, Yu-Jian, Li, Zi-Zhong (2011): Descriptions of six new species of Midoria (Hemiptera: Cicadellidae: Ledrinae) from China with a key to the species of the genus. Zootaxa 2897: 57-63, DOI: 10.5281/zenodo.207765
03E86429A31AFFDEE2ADC340F1F71AA1.text	03E86429A31AFFDEE2ADC340F1F71AA1.taxon	http://purl.org/dc/dcmitype/Text	http://rs.tdwg.org/ontology/voc/SPMInfoItems#GeneralDescription	text/html	en	Midoria zunyiensis	<div><p>Midoria zunyiensis sp. nov.</p><p>Figs 9–12, 27, 30</p><p>Description. Head, pronotum and scutellum brown. Median length of vertex about as long as 2/3 of half width between eyes, shorter than scutellum obviously (Fig. 27). Face black (Fig. 30).</p><p>Male genitalia: Paramere long, anterior portion shorter and more slender than caudal portion, caudal portion obviously robust, apex strongly recurved medioventrally, with some macrosetae near recurved area (Figs 9, 10). Connective approximately T-shaped with high dorsomedial keel (Figs 9, 10). Aedeagus shaft slightly compressed, with long process arising from each side of posterior margin basally, process apex slightly wider than base (Fig. 10). Pygofer approximately orbicular, with long process originating from ventral margin (Fig. 11).</p><p>Other characteristics are as shown in Figs 9–12, 27, 30.</p><p>Measurement. Length (including tegmen): 3, 6.5 mm.</p><p>Hosts. Unknown.</p><p>Type Material. Holotype 3, CHINA: Guizhou, CHINA: Guizhou, Zunyi, Suiyang, Kuankuoshui, 6 June 2010, coll. Li Yujian. Paratype: 13, CHINA: Guizhou, Suiyang, Kuankuoshui, 7 June 2010, coll. Dai Renhuai &amp; Li Hu. (GUGC).</p><p>Remarks. This species is similar to Midoria longicornis (Zhang &amp; Yang), but can be distinguished by the shape of aedeagal shaft in side view, the shape of the paramere and the shape of the aedeagal ventrosubapical processes (Figs 9, 10).</p><p>Etymology. The species name is derived from the type locality.</p></div>	https://treatment.plazi.org/id/03E86429A31AFFDEE2ADC340F1F71AA1	Public Domain	No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.		MagnoliaPress via Plazi	Li, Yu-Jian;Li, Zi-Zhong	Li, Yu-Jian, Li, Zi-Zhong (2011): Descriptions of six new species of Midoria (Hemiptera: Cicadellidae: Ledrinae) from China with a key to the species of the genus. Zootaxa 2897: 57-63, DOI: 10.5281/zenodo.207765
03E86429A31AFFDBE2ADC563F0441BA7.text	03E86429A31AFFDBE2ADC563F0441BA7.taxon	http://purl.org/dc/dcmitype/Text	http://rs.tdwg.org/ontology/voc/SPMInfoItems#GeneralDescription	text/html	en	Midoria torsiva	<div><p>Midoria torsiva sp. nov.</p><p>Figs 17–20, 32, 35</p><p>Description. Head, pronotum and scutellum brown. Median length of vertex longer than half width between eyes or scutellum (Fig. 32). Face black (Fig. 35).</p><p>Male genitalia: Paramere long, anterior portion longer than caudal portion, caudal portion somewhat robust, with apex strongly recurved medioventrally, with some macrosetae near the recurved area (Figs 17, 18). Connective approximately T-shaped with high dorsomedial keel (Figs 17, 18). Aedeagus shaft compressed, with process arising from each side of posterior margin basally, apex of process twisted like ox horn (Figs 17, 18). Pygofer side oblong, long posterior process from ventral margin with small spicule near base (Fig. 19).</p><p>Other characteristics are as shown in Figs 17–20, 32, 35.</p><p>Measurement. Length (including tegmen): 3, 7.5–7.7 mm.</p><p>Hosts. Unknown.</p><p>Type Material. Holotype 3, CHINA: Yunnan, Lushui, Pianma, 21 May 2010, coll. Zhang Pei. Paratypes: 23, CHINA: Yunnan, Lushui, Pianma, 21 May 2010, coll. Zhang Pei; 13, CHINA: Yunnan, Gongshan, Bingzhongluo, 13 May 2010, coll. Zheng Yanli (GUGC).</p><p>Remarks. This species is similar to Midoria lamellata Li &amp; Li, but can be distinguished by the shape of the male pygofer side, the shape of the paramere and the shape of the aedeagal ventrosubapical processes (Figs 17, 18, 19).</p><p>Etymology. The species name is derived from the Latin word torsiva (tortuose, screwlike), indicating the shape of the aedeagal shaft processes.</p></div>	https://treatment.plazi.org/id/03E86429A31AFFDBE2ADC563F0441BA7	Public Domain	No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.		MagnoliaPress via Plazi	Li, Yu-Jian;Li, Zi-Zhong	Li, Yu-Jian, Li, Zi-Zhong (2011): Descriptions of six new species of Midoria (Hemiptera: Cicadellidae: Ledrinae) from China with a key to the species of the genus. Zootaxa 2897: 57-63, DOI: 10.5281/zenodo.207765
03E86429A31FFFDBE2ADC14CF7081C15.text	03E86429A31FFFDBE2ADC14CF7081C15.taxon	http://purl.org/dc/dcmitype/Text	http://rs.tdwg.org/ontology/voc/SPMInfoItems#GeneralDescription	text/html	en	Midoria hastifera	<div><p>Midoria hastifera sp. nov.</p><p>Figs 21–24, 33, 36</p><p>Description. Head, pronotum and scutellum dark brown. Median length of vertex about as long as half width between eyes or scutellum (Fig. 33). Face black (Fig. 36).</p><p>Male genitalia: Paramere long, anterior portion longer and more slender than caudal portion, caudal portion somewhat robust, apex strongly recurved medioventrally, with some macrosetae near recurved area (Figs 21, 22). Connective T-shaped with dorsomedial keel (Figs 21, 22). Aedeagus shaft laterally compressed, with process arising from each side of posterior margin basally, halberd-shaped (Figs 21, 22). Pygofer side ovoid, with long posterior process arising from ventral margin, (Fig. 23).</p><p>Other characteristics are as shown in Figs 21–24, 33, 36.</p><p>Measurement. Length (including tegmen): 3, 6.1 mm.</p><p>Hosts. Unknown.</p><p>Type material. Holotype 3, CHINA: Yunnan, Lushui, Pianma, 9–10 May 2010, coll. Li Hu (GUGC).</p><p>Remarks. This species is similar to Midoria hamulata sp. nov., but can be distinguished by the shape of the male pygofer side, the shape of the paramere and the shape of the aedeagal ventrosubapical processes (Figs 13, 14, 15, 21, 22, 23).</p><p>Etymology. The species name is derived from the shape of the aedeagal shaft processes (hastate, hastatus).</p></div>	https://treatment.plazi.org/id/03E86429A31FFFDBE2ADC14CF7081C15	Public Domain	No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.		MagnoliaPress via Plazi	Li, Yu-Jian;Li, Zi-Zhong	Li, Yu-Jian, Li, Zi-Zhong (2011): Descriptions of six new species of Midoria (Hemiptera: Cicadellidae: Ledrinae) from China with a key to the species of the genus. Zootaxa 2897: 57-63, DOI: 10.5281/zenodo.207765
