taxonID	type	description	language	source
03A6BE4C1B49FF9EFF3FF9B2FC44096F.taxon	diagnosis	Diagnosis. Shell small, squat and oval and wall made up of a fixed tergum, a fixed scutum, a carina and a rostrum. Moveable tergum and scutum forming an opercular lid. Articulation between plates simple, without interpenetrant elements. Single carinolatus and rostrolatus present on free side of shell. Included genus. Proverruca Withers, 1914.	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B49FF9EFF3FF9B2FC44096F.taxon	discussion	Remarks. This genus was originally assigned to the Verrucomorpha by Withers (1914, 1935), and subsequently placed in the family Proverrucidae by Newman (in Newman and Hessler, 1989), together with Eoverruca Withers, 1935. In the phylogenetic scheme of Newman (1987) and Newman & Hessler (1989) proverrucids were depicted as basal to the verrucomorphs and sharing a common ancestor with the extant Neoverruca Newman, in Newman & Hessler, 1989. Gale (2014, 2020) subsequently demonstrated that Proverruca and Eoverruca were very different and placed the latter in the verrucomorph family Eoverrucidae. Proverruca is known from a single articulated individual and several hundred isolated plates (Withers 1935). Withers’s somewhat stylised figure of the articulated specimen (Withers 1914, 1935), partly reconstructed, remained the basis of our understanding of the genus for 100 years, as well as of the family Proverrucidae (Newman, in Newman and Hessler 1989). The interpretation presented by Withers was that the wall of the capitulum was made up of a loosely articulated rostrum, fixed scutum, fixed tergum, carina, a rostrolatus and a carinolatus (Withers 1935, figs 33 – 36). The opercular lid is made up of a moveable scutum and a moveable tergum. Withers used surface sculpture to characterise a number of species of Proverruca, all known only from a few valves. Gale (2014) redescribed the articulated specimen of P. vinculum (see Fig. 1 here) and noted that the plate which Withers identified as a carina was in fact the rostrum. The carina was known only in the articulated specimen, and in the species P. dentifer Gale, in Gale & Sørensen, 2015 from the upper lower Campanian of Ivö Klack in southern Sweden. Gale (2014) had earlier argued that Proverruca was a derived scalpelliform of uncertain affinities which was convergent in form with the Verrucomorpha. This interpretation was accepted by Chan et al. (2021).	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9EFF3FFB45FAFB0B3F.taxon	type_taxon	Type species. Proverruca vinculum Withers, 1914. Included species. In addition to the type species, Proverruca cancellata Withers, 1935, Proverruca nodosa Withers, 1935, Proverruca laurae Withers, 1923, Proverruca dentifer Gale, in Gale & Sørensen, 2015, Proverruca anglica Gale, 2020, Proverruca minuta Gale, 2025, Proverruca cenomanica Gale, 2025 and Proverruca ornata sp. nov.	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9EFF3FFB45FAFB0B3F.taxon	diagnosis	Diagnosis. As for family.	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9EFF3FFB45FAFB0B3F.taxon	discussion	Remarks. Proverruca is a very distinctive Late Cretaceous genus and occurs as a widespread, but uncommon, minority element in chalk (Cenomanian-Maastrichtian) cirripede faunas. It also occurs in nearshore deposits.	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9BFF3FF9B4FC720CB2.taxon	description	Fig. 2 A, B, F – V	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9BFF3FF9B4FC720CB2.taxon	diagnosis	Diagnosis. Large Proverruca which bears a striate to complex cancellate sculpture on the fixed scutum, and in which the adductor muscle scar on the interior of this valve is very large and deeply impressed.	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9BFF3FF9B4FC720CB2.taxon	materials_examined	Type material. The large fixed scutum (Fig. 2 A, B; NHMM JJ 6503) is the holotype, the other figured valves (Fig. 2 F – V) are paratypes (NHMM JJ 5886, JJ 9619 a – f and JJ 13426).	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9BFF3FF9B4FC720CB2.taxon	etymology	Derivatio nominis. In reference to the complex sculpture of the valves.	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9BFF3FF9B4FC720CB2.taxon	materials_examined	Type locality and horizon. Zeven Wegen Member (Gulpen Formation) from the former CPL quarry at Haccourt, Liège, Belgium. Additional material. A total of 16 valves, including 7 fixed scuta, 4 carinae, 1 moveable scutum, 1 moveable tergum, all from the same locality and stratigraphical intervals as the types.	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9BFF3FF9B4FC720CB2.taxon	description	Description. The fixed scuta (Fig. 2 A – C, E, F, I – K, O – S) are triangular to subrectangular in outline and display considerable variation in sculpture and shape with ontogeny. The Smallest specimens, approximately 2.5 mm in length (Fig. 2 C, E, F), are nearly equilaterally triangular and is inclined dorsally. The external sculpture comprises interrupted apicobasal ridges, and the internal scutal adductor scar is large. The moveable scutum (Fig. 2 L, M) is triangular in outline, slightly inclined dorsally, and the height (tip broken off) is greater than the breadth. The external surface carries 6 coarse apicobasal ribs, interrupted by regular growth increments. On the interior, an oval scutal adductor is present adjacent to the occludent margin. The moveable tergum (Fig. 2 N) is asymmetrically kite-shaped and bears a low, sinuous apicobasal ridge which separates the carinal and scutal surfaces. The carinal and occludent margins are long and straight, and angled at 120 o and the scutal margin is weakly convex. The tergal margin (contacting the fixed tergum) is short and convex. The apical part of the occludent / carinal surface carries weak apicobasal ridges, and the scutal surface bears tubercles aligned with the scutal margin. The carina (Fig. 2 D, G, H, T, U) is robust, hemiconical and inclined ventrally, and the external surfaces carries weak, interrupted apicobasal ridges. The margin contacting the fixed tergum is broad and serrate, bearing transverse ridges and intervening grooves (Fig. 2 D, H, U). The rostrum and fixed tergum are unknown. As the fixed scuta grew during ontogeny, the adductor scar enlarged to occupy most of the internal surface (Fig. 2 J, Q, S) and the ventral margin of the valve elongated. The occludent surface became inturned (Fig. 2 K, S) and the basal part of this region articulates with the rostrum (see Fig. 1 A, B). In very large specimens of a length of 10 mm (Fig. 2 A, B) the occludent surface is sharply inflexed, and the rostral margin is angled to the basal margin. The external sculpture changes with growth, and the apicobasal ridges became more numerous and finer (Fig. 2 J, K, Q, S). These are weaker and interrupted by growth increments in some specimens (Fig. 2 O). In the largest specimen (Fig. 2 A, B), the apicobasal ridges on the lateral (tergal) surface are replaced by transverse rows of closely spaced, irregularly shaped nodes, and a cancellate sculpture comprising weak apicobasal ridges and transverse ridges is present on the occludent surface (Fig. 2 A).	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
03A6BE4C1B4BFF9BFF3FF9B4FC720CB2.taxon	discussion	Remarks. Proverruca ornata sp. nov. differs from P. anglica Gale, 2020 (Fig. 3 K – M) in its larger scutal adductor scar on the fixed tergum and its finer apicobasal ribbing. It is differentiated from P. cancellata (Withers, 1935; Fig. 3 A – E, I, J, O – R) in its possession of apicobasal ribbing, and in the presence of tubercles on the scutal surface of the moveable tergum. In P. dentifer Gale, 2015 (Fig. 3 X, Y), the moveable scutum carries regular, apicobasal rows of thorns on the scutal surface; these are absent in P. ornata sp. nov. in which the few tubercles are arranged in margin-parallel rows. Additionally, the scutal adductor scar on P. dentifer is smaller and positioned close to the basal margin (Fig. 3 S). Proverruca ornata sp. nov. is distinguished from P. vinculum Withers, 1914 (Fig. 3 G, H), P. nodosa Withers, 1935 (Fig. 3 Z, A 1) and P. laurae Withers, 1923 (Fig. 3 A 2) in both the shape and sculpture of the valves. Proverruca ornata sp. nov. is the only species of Proverruca of which a growth series is known and the ontogenetic variation in sculpture and valve shape displayed by the suite of fixed terga of P. ornata sp. nov. is remarkable. Although the diagnoses of other described species of Proverruca appear to hold true, care should be taken in describing new taxa of the genus on the basis of limited material.	en	Gale, Andrew S., Jagt, John W. M. (2025): A new species of the cirripede genus Proverruca Withers, 1914 (Crustacea, Thoracica) from the upper Campanian (Upper Cretaceous) of northeastern Belgium. Zootaxa 5583 (2): 383-390, DOI: 10.11646/zootaxa.5583.2.9, URL: https://doi.org/10.11646/zootaxa.5583.2.9
